Industrial Band Saws for

three-wheeled portable bandsaw - call Bill Falberg today about your next custom-built industrial bandsaw - made in the USA

Professional Builders
Industrial Band Saws for Intricate Details on BIG timbers

Announcing Slicer!
a new generation of
Industrial Veneer Mill

Falberg three-wheeled portable timber band saws are currently the only portable band saws you can get with enough cut depth to handle 18” thick timbers. With a throat width of 18” they're also the only portable band saws that can  maneuver around complex details in big timbers. Working with big timbers demands far more performance than you'll get with a little die cast two-wheeler.

New Saws - Old Designs

To illustrate how little experimentation has gone into band saw design for the past two hundred years:

How different is this antique band saw

Antique Band Saw   

from this? classic Delta 14” two-wheeler band-saw

   State of the art Delta 14”  


Falberg Sets New Standard
with three-wheeled portable
timber band saws

antique band saw

Corbel King

Compare those to the Falberg Corbel King which weighs barely 100 pounds yet has more than three times the throat area. If you take the time to visit our web pages you'll learn how wheels, frames,  tensioners, and tracking assemblies make those impossible cuts easy and you'll see what a dynamic tool your band saw can be.

Falberg Saws also makes a less expensive two-wheeled portable timber band saw with an 8”W x 12”D throat called the Elf which we stopped stocking for a while, because no matter how inexpensive, nor how superior it was to the noisy little die-cast imports, it couldn't compete with our own three-wheeled Titan with three times the throat area. Once a customer found the Titan, they lost interest in smaller saws.
(Why are band saws named by their wheel diameter and not their throat area;
as in W” x H” =A” ?)

When you compare our saws in terms of prices per square inch, Titan wins every time.  You can still buy an Elf - they are light, compact, and handy for small arches.

Falberg on the Cutting Edge Again
floor-standing vertical resaw - industrial veneer mill - for timber and metal

classic Delta 14” two-wheeler band-saw

Slicer

 Applying the experience gained from designing portable timber band saws, we found ourselves in a unique position to design and build a whole new generation of floor-standing vertical resaws we call Slicer!  Specifically designed for the industrial milling of bandsawn veneer, Slicer can be configured to cut metal or whatever else you might have. With a 1" narrow-kerf (3/32") carbide-tipped resaw blade, Slicer will butter-knife through 18" hardwood effortlessly.

There are too many very slick and "revolutionary" fencing and feedrail options to list them all here, so call 970-399-7216 and we can talk about it. 


Titan - three-wheeled portable industrial timber bandsaw - made in USA


Check out our Custom / Industrial Applications page for examples of other custom saws we've built.

You'll also see why nobody ever sells their used Falberg saw.

They pay for themselves over and over and over again; year after year.

Slicer
Titan
Corbel King
Elf